Cisco 11.0 BT Release Notes page 40

show extended channel tn3270-server client-ip-address
Table 6 describes significant fields in the display.
Table 6
Field
LU locaddr
LU lu-name
CLIENT-IP:TCP
ip-addr:tcpport
STATE lu-state
MODEL model
FRAMES IN number
FRAMES OUT number
IDLE FOR time
PU IS pu-name
LU IS type
NEGOTIATED type
40 TN3270 Server Commands
sdt req
unbind req
Client disconnect req
notify resp
warm actpu req
OUT len=28 2Cxxxxxxxx16038100F14011C3F0
IN len=9 2C0001040016838100
OUT len=35 2Dxxxxxxxx3D6B80003201000000
IN len=10 2D000104043DEB800032
OUT len=132 2Cxxxxxxxx0303800005C21D607C
IN len=9 2C0000040003838000
IN len=20 xxxxxxxxxx110B80008106200C0600
OUT len=12 2Cxxxxxxxx118B8000810620
Show tn3270-server client-ip-address Field Descriptions
Description
LOCADDR of the LU.
If the PU is directly connected, then the name shown is the one
generated by the seed. If DLUR, then only the unqualified portion
is shown. The NETID portion will be the same as the current
DLUS.
Client's IP address and TCP port number
The LU state and their meanings are:
• unknown—LU in an undefined state.
• inactive—LU didn't receive ACTLU.
• active—LU received ACTLU and acknowledged positively.
• p-sdt—LU is bound but there is no SDT yet.
• act/sess—LU is bound and in session.
• p-actlu—Telnet connects in and is waiting for ACTLU.
• p-ntf/av—Awaiting host notify-available response.
• p-ntf/ua—Awaiting host notify-unavailable response.
• p-reset—Awaiting a buffer to send DACTLU response.
• p-psid—Awaiting NMVT Reply PSID response.
• p-bind—Waiting for host to send bind.
• p-unbind—Awaiting host unbind response.
• wt-unbnd—Waiting for client to acknowledge disconnection.
• wt-sdt—Waiting for client to acknowledge SDT.
3278 model type of client; blank if STATIC LU.
Number of frames sent inbound to the host.
Number of frames sent outbound from the host.
Time the client has been idle. The time is in HH:MM:SS.
Name of the PU.
Whether LU is DYNAMIC or STATIC.
Whether client is TN3270 or TN3270E.