Cisco 11.0 BT Release Notes page 49

Client connect req
Reply PSID pos rsp
actlu req
bind req
sdt req
OUT len=12 2Dxxxxxxxx456B80000D0201
IN len=25 xxxxxxxxxx45EB80000D0201000000
OUT len=53 2Dxxxxxxxx466B800031010303B1
IN len=10 2D0001010646EB800031
OUT len=10 2D00010106476B8000A0
IN len=10 2D0001010647EB8000A0
OUT len=1677 2Cxxxxxxxx010381C07EC7114040
IN len=9 2C0001010001838100
Table 10 describes significant fields in the display.
Table 10 Show tn3270-server pu lu Field Descriptions
Field
LU locaddr
NAME lu-name
CLIENT-IP:TCP
ip-addr:tcpport
STATE lu-state
MODEL model
FRAMES IN number
FRAMES OUT number
IDLE FOR time
PU IS pu-name
LU IS type
NEGOTIATED type
BYTES IN/OUT
number/number
Description
LOCADDR of the LU.
Name of the TN3270 LU.
Client's IP address and TCP port number.
The LU state and their meanings are:
• unknown—LU is in an undefined state.
• inactive—LU did not receive ACTLU.
• active—LU received ACTLU and acknowledged positively.
• p-sdt—LU is bound, but there is no SDT yet.
• act/sess—LU is bound and in session.
• p-actlu—Telnet connects and is awaiting ACTLU.
• p-ntf/av—Awaiting host notify-available response.
• p-ntf/ua—Awaiting host notify-unavailable response.
• p-reset—Waiting for a buffer to send DACTLU response.
• p-psid—Waiting for NMVT Reply psid response.
• p-bind—Waiting for host to send bind.
• p-unbind—Awaiting host unbind response.
• wt-unbnd—Waiting for client to acknowledge disconnection.
• wt-sdt—Waiting for client to acknowledge SDT.
3278 model type of client; blank if STATIC LU.
Number of frames sent to the host.
Number of frames sent out from the host.
Time the client has been idle. The time is in HH:MM:SS.
Name of the PU.
Whether LU is DYNAMIC or STATIC.
Whether client is TN3270 or TN3270E.
Total number of bytes sent to/received from the host.
show extended channel tn3270-server pu lu
TN3270 Server Commands 49