Cisco 11.0 BT Release Notes page 46

show extended channel tn3270-server pu
Table 9 describes significant fields in the display.
Table 9
Field
NAME pu-name
IP:TCP ip-addr:tcpport
XID number
STATE pu-state
LINK type
DESTINATION mac-address or
PU-name
R-LSAP number number
IDLE-TIME number
KEEPALIVE number
UNBIND-ACT type
GENERIC-POOL type
BYTES IN/OUT
number/number
FRAMES IN/OUT
number/number
NEGRSP IN/OUT
number/number
ACTLUS number
DACTLUS number
BINDS number
LU number
NAME lu-name
46 TN3270 Server Commands
Show tn3270-server pu Field Descriptions
Description
Name of the PU as configured.
IP address and TCP port number configured for the PU.
Configured XID - idblk and idnum.
Possible state values and their meanings are:
• shut—The PU is configured, but is in a shut state.
• reset—The link station of this PU is not active.
• test—PU is sending a TEST to establish link.
• xid—TEST is responded, XID is sent.
• p-actpu—The link station is up, but no ACTPU is received.
• active—ACTPU is received and acknowledged positively.
• act/busy—Awaiting host to acknowledge the SSCP-PU data.
• wait—Waiting for PU status from CIP.
• unknown—Direct PU is in an undefined state.
• p-rqactpu-r—PU is pending a request ACTPU response.
• p-active—DLUR PU and direct PU states disagree.
• p-dactpu—PU is pending DACTPU.
• dlur???—DLUR PU is in undefined state.
LINK type is either internal adapter type and internal adapter
number or dlur if it is a SNA session switch PU.
If a direct PU, then it is the destination MAC address, otherwise, it
is the name of the partner PU.
Remote and local SAP values.
Configured idle-time for this PU.
Configured keepalive for this PU.
Configured unbind action for LUs on this PU.
Configured generic-pool for LUs on this PU.
Total number of bytes sent to/received from the host for this PU.
Total number of frames sent to/received from the host for this PU.
Total number of SNA negative responses sent to/received from the
host.
Total number of ACTLUs received from the host.
Total number of DACTLUs received from the host.
Total number of BINDs received from the host.
LOCADDR of the LU.
Name of the TN3270 LU.