Hull; Jet Pump Water Intakes - Sea-doo 230 Challenger 2008 Operator's Manual

Table of Contents

Advertisement

ITEM

Hull

Jet pump water intakes

Bilge
Battery
Main battery cut-off switch
Navigation lights
Fuel tank
Engine compartment
Fire extinguisher
Steering
Throttle/shifter system
Speed control
system/Perfect Pass
(if applicable)
Bilge blower and bilge pump
DESS post and engine
start/stop switches
Mandatory safety boating
equipment
Storage compartment covers Ensure they are closed and latched.
Engines oil level
Cooling system coolant level
Sacrificial anodes
Hull
Inspect hull for cracks or damage.
Jet Pump Water Intakes
Remove weeds, shells, debris or any-
thing else that could restrict the flow
of water and damage the cooling sys-
tems or propulsion units. Clean as
necessary. If any obstruction cannot
be removed, refer to an authorized
Sea-Doo Sport Boat dealer for servic-
ing.
SUMMARY
Inspect for damage.
Inspect/clean.
Drain. Ensure plug is secured.
Inspect tightness of cables and retaining straps and
verify charge.
Ensure it is in the ON position.
Check operation.
Refill.
Verify fuel exhaust components.
Inspect condition/mounting.
Check operation.
Check operation.
Perform linkage test
(refer to PERFECT PASS INSTRUCTION MANUAL).
Check operation.
Check operation.
Check operation.
Ensure proper level is in each engine.
Refill as needed.
Ensure proper level is in each engine.
Refill as needed.
Verify condition (replace when 50% corroded).
lmo2007-003-065_ a
TYPICAL
1. Inspect this area
_____________________
OPERATION
4
89

Advertisement

Table of Contents
loading

This manual is also suitable for:

230 challenger se 2008230 wake 2008

Table of Contents