Hyundai Palisade 2023 Owner's Manual page 203

Convenience Features
If the indicator
it indicates that the garage door is
"Closing".
The indicator turns solid green once
the garage door has closed.
If the indicator
it indicates that the garage door is
"Opening".
The indicator turns solid green once
the garage door has fully opened.
If the indicator
turn to green, it indicates that the
last status of garage door was not
received properly. The HomeLink
mirror tries to receive the last known
status of the garage door for a few
seconds.
3) Recalling Garage Door Status
HomeLink mirror with Two-Way
Communication provides a way to view
the last stored message from the garage
door opener. In order to recall the last
known status of the last activated device,
press the buttons "1 and 2" OR "2 and 3"
simultaneously.
If the indicator
it indicates that the last activated
device was "closed" properly.
If the indicator
it indicates that the last activated
device was "open" properly.
5-54
flashes in Orange,
flashes in Orange,
or does not
appears solid Green,
appears solid Green,
3. Erasing HomeLink® Buttons
1) Erasing and Reprogramming a Single
HomeLink® Button:
1. Press and hold the desired HomeLink
button you want to re-program. DO
NOT release the button.
2. The HomeLink indicator light
illuminate solid green. Release the
button as soon as the HomeLink
indicator light begins to flash
orange, usually about 20 seconds.
3. Proceed with the steps in the
"Programming a New HomeLink
Button" section.
Information
If you do not complete the re-
programming of a new device to the
button, it will revert to the previously
stored programming.
2) The following instructions will erase
ALL buttons:
1. Press and hold the buttons
simultaneously.
2. The HomeLink indicator light
illuminate solid Orange for about 10
seconds.
3. Release the buttons once the
HomeLink indicator light
to Green and flashes rapidly.
4. Now all three HomeLink buttons
, and are cleared of any
programming.
will
B0135EU09
and
will
changes