Reverse Parking Aid - Hyundai Palisade 2023 Owner's Manual

Reverse Parking Aid (if equipped)
When the gear is shifted to the R
(Reverse) position, the side view mirror(s)
will rotate downwards to aid with driving
in reverse.
The state of the side view mirror button
determines whether or not the mirrors
will move:
How it works
When the L or R switch
both side view mirrors will move.
If the L and R switch
selected both outer side view mirrors
will not move.
The side view mirrors will automatically
revert to their original positions if any of
the following occur:
The ignition switch is placed to either
the LOCK/OFF position or the ACC
position.
The gear is shifted to any position
except R (Reverse).
The side view mirror adjustment
button is not selected.
Reverse parking aid user settings
mode
You may change the angle of the side
view mirror if it is difficult to see the rear
view with the basic downward mirror
angle provided when reversing.
When the vehicle is first delivered, the
set downward angle of the left and right
side view mirror are different to ensure
driver visibility.
1. Make sure the vehicle is stopped.
B0136EU02
2. Depress the brake pedal and shift
3. Operate either L or R switch to select
is selected
4. After adjusting the angle to save the
are not
5. Set the opposite side view mirror
Resetting reverse parking aid user settings
mode
To change the side view mirror angle
back to the basic angle, shift the gear to
R (Reverse), and adjust the mirror angle
higher than when the gear is in P (Park),
N (Neutral) and D (Drive).
When changing the angle of both side
view mirrors, it is recommended to
change the angle one side at a time
following the procedure 1 to 4.
the gear to R (Reverse). When L (Left)
or R (Right) switch is selected, both
side view mirror angle will move
downward to the basic set position.
the side view mirror you would like
to adjust. Then press " ,
switch to adjust the side view mirror
to the desired angle.
adjusted side view mirror angle, shift
the gear to another position other
than R (Reverse), or change the L and
R buttons to the neutral position (L
and R switchs are not pressed).
following the above procedure 1 to 4.
NOTICE
05
, , "
5-59