Hyundai Palisade 2023 Owner's Manual page 440

Driver Assistance System
When the vehicle is stopped due
to emergency braking, the 'Drive
carefully' warning message will
appear on the cluster.
For your safety, the driver should
depress the brake pedal immediately
and check the surroundings.
Brake control will end after the vehicle
is stopped by emergency braking for
approximately 2 seconds.
WARNING
Take the following precautions when
using Blind-Spot Collision Warning:
For your safety, only change the
Settings after parking the vehicle at a
safe location.
If any other system's warning
message is displayed or audible
warning is generated, Blind-Spot
Collision Warning warning message
may not be displayed and audible
warning may not be generated.
You may not hear the warning sound
of Blind-Spot Collision Warning if the
surrounding is noisy.
Blind-Spot Collision Warning may
not operate if the driver applies the
brake pedal to avoid collision.
7-38
When Blind-Spot Collision Warning
is operating, braking control by
the function will automatically
cancel when the driver excessively
depresses the accelerator pedal or
sharply steers the vehicle.
During Blind-Spot Collision Warning
operation, the vehicle may stop
suddenly injuring passengers and
shifting loose objects. Always have
the seat belt on and keep loose
B0313EU03
objects secured.
Even if there is a problem with Blind-
Spot Collision Warning, the vehicle's
basic braking performance will
operate properly.
Blind-Spot Collision Warning does
not operate in all situations or cannot
avoid all collisions.
Blind-Spot Collision Warning may
warn the driver late or may not warn
the driver depending on the road and
driving conditions.
Driver should maintain control of the
vehicle at all times. Do not depend
on Blind-Spot Collision Warning.
Maintain a safe braking distance, and
if necessary, depress the brake pedal
to reduce driving speed or to stop
the vehicle.
Never operate Blind-Spot Collision
Warning on people, animal, objects,
etc. It may cause serious injury or
death.
WARNING
The brake control may not operate
properly depending on the status of
ESC (Electronic Stability Control).
There will only be a warning when:
- The ESC (Electronic Stability Control)
warning light is on
- ESC (Electronic Stability Control) is
engaged in a different function