Hyundai Palisade 2023 Owner's Manual page 199

Convenience Features
Visit the HomeLink website at: www.
homelink.com. Then at the top of the
page, choose your vehicle make. Then
watch the You Tube video, and/or
access additional website information.
If you choose to access the website
via your cell phone, scan the QR code.
Or, call HomeLink customer support
at 1-800-355-3515 (Please have the
vehicle make/model AND the opener
device make/model readily available.)
1) Programming Preparation
1. When programming a garage door
opener, it is advised to park the
vehicle outside of the garage.
5-50
2. It is recommended that a new battery
be placed in the handheld transmitter
of the device being programmed to
HomeLink for quicker training and
accurate transmission of the radio-
frequency signal.
3. Place the ignition switch to the ACC
(Accessory) position for programming
of HomeLink.
1. Press and release the HomeLink
button (1), (2) or (3), you would like
to program. The HomeLink indicator
light (7) will flash orange slowly (if
not, perform the steps of "Erasing
HomeLink Buttons" section, and start
over).
B0135EU04
2. Position the garage door opener
remote 1–3 inches (2–8 cm) away from
the HoleLink buttons.
B0135EU05
B0135EU06