Device List; Add Tester Pod; Deleting A Diagnostic Base; Add Cvg Device - Midtronics DSS-5000PKIT User Manual

Chapter 9: Settings
Date/Time Settings
1. Tap to access the Date/Time setting defaults.
Select Time Format
Select Date Format
Select Time Zone
Set Date
Set Time
Select Time Format
12 or 24 Hour Format
Select Date Format
Month/Day/Year, Day/Month/Year, or Year/Day/Month
Select Time Zone
Time zone in which the analyzer will be operated.
Set Date
Tap or to enter the month, day, and year. Tap Set to
 
save the date or Cancel to exit without saving.

Sep
Oct
Nov

CANCEL
Set Time
Tap or to enter the hours, minutes, and AM/PM. Tap
 
Set to save the date or Cancel to exit without saving.

9
10
11

CANCEL
2. Tap to return to the Shop Information screen.
12 Hour
10/18/2016
EST
 
17 2015
18 2016
19 2017
 
SET
 
50 AM
51 PM
52
 
SET

Device List

Displays connected and linked accessory devices.
Additional devices and CVG-2 modules can also be
detected and linked to the analyzer.
Add
Delete Paired Device

Add Tester Pod

1. Tap to add a device.
2. Move the device to be linked within 30 feet of the Control-
ler, turn on the device, then tap .
3. A list of detected devices is displayed. Tap > next to the
desired device to select it. If the desired device is not dis-
played, tap to refresh the list.
NOTE: A passkey number is automatically gener-
ated once the Bluetooth pairing has been estab-
lished.
A confirmation message is displayed when the device has
been successfully linked.
4. Tap  to return to the Device List screen.

Deleting A Diagnostic Base

1. Tap next to the base to be deleted.
2. Tap Yes to delete.

Add CVG Device

1. Tap to add a CVG.
2. Plug the CVG into the OBDII port of any vehicle.
3. Turn the vehicle ignition on, but do not start the vehicle.
4. A list of detected CVGs is displayed. Tap > next to the de-
sired CVG to select it. If the desired CVG is not displayed,
tap to refresh the list.
NOTE: A passkey number is automatically gener-
ated once the Bluetooth pairing has been estab-
lished.
A confirmation message is displayed when the CVG has
been successfully linked.
5. Tap  to return to the Device List screen.
28
DSS-5000
Refresh

Enabled