Display Settings; Brightness; Auto Brightness; Sleep Time - Midtronics DSS-5000PKIT User Manual

DSS-5000

Display Settings

Adjust the Controller display including the Brightness,
Sleep Time, and Dim Time. Auto Brightness can also
be turned on and off.

Brightness

Adjust the display Brightness by tapping and holding the
slider, then moving it right or left to make the screen brighter
or darker.

Auto Brightness

Enable and disable Auto Brightness by taping on the check box.

Sleep Time

Adjust the amount of elapsed time before the Controller goes
into a power saving (Sleep) mode. Default = 2 minutes.

Dim Time

Adjust the amount of elapsed time before the Controller goes
into a power saving (Dim) mode. Default = 1 minute.

BMIS Login (Admin Only)

Enter and edit BMIS Login and Password information.
Log into a BMIS account.
Login
Password
Zone3@yourshop.com
• • • • • •

Shop Information (Admin Only)

Access default Shop Information including Store
Name, address, and phone number. Also access
battery test defaults including rating, temperature
units, and decimal separator. Use also to adjust the
tester date and time settings.
Settings Home

Test Settings

Shop Information

Use the onscreen keypad to enter the store name, address, and
phone number.
Store Name
Street Address
Street Address 2
City
State
Zipcode
Phone #
Test Settings
1. Tap to access the test setting defaults. Tap the boxes or
icons to change the values.
Battery Rating
Temperature Units
Decimal Separator
Create MDCA Log File
Battery Rating
Default battery rating units used when testing batteries.
Temperature Units
Default temperature units used when measuring battery
temperature.
Decimal Separator
Default number display using commas or periods
separators.
Create MDCA Log File
The MDCA function is used by Midtronics technical support.
2. Tap to return to the Shop Information screen.
27
Chapter 9: Settings
Date/Time Settings
Create MDCA Log File
∑
Midtronics
7000 Monroe
Willowbrook
IL
60527
1-630-323-2800
CCA
0 F
00.00