DCA-8000
IMPORTANT: Assemble the charger cart and mount
the charger on it before setting up the DCA-8000.
Charging Cables
1.
Insert the communication cable.
2.
Insert and rotate the charge ca-
ble quick connectors clockwise
180° to lock them onto the Quick
Connector Locking Post on the
charger.
NOTE: Pre twist the charge cables counter clock-
wise before installing in order to avoid putting
excess strain on the cables.
3.
The connection process is complete when all three cables
are connected to the charger.
Locking Power Cord
Insert until the connector
locks in place.
To release/remove the
power cord from the
charger's power socket,
pull back on the red
tab on the side of the
connector.
Wireless Barcode Scanner Cable
Insert the RJ50 connector in the bottom of the scanner base.
Then use the screws on the DB9 connector to secure the cable
from the dock to the charger.
www.midtronics.com
DCA-8000
Subaru
Initial Setup
1.
2.
3.
Pull Back To
Release
4.
5.
6.
Upon initial power-up, the Language Settings screen is dis-
played. Tap Next to continue.
System
Select the Controller default language
Language
displayed on the screen.
Test Result
Select the Controller default language for
Language
all displayed tests and test results.
Email
Select the default standard language for
Language
the analyzer to use for all tests and results
sent via email.
Print
Select the default standard language for
Language
the analyzer to use for all tests and results
printed using a networked printer.
A Consent to collect data screen is displayed. Tap the Con-
sent check box and then tap Next to continue.
The Date/Time Settings are displayed. Tap Next to continue
after making any adjustments.
Select Time
12-hour or 24-hour format
Format:
Select Date
DD/MM/YYYY, MM/DD/YYYY, or
Format:
YYYY/MM/DD
Select Time
Time zone offset from Greenwich
Zone:
Mean Time
Set Date:
Set the current date
Set Time:
Set the current time in the selected time zone
The Test Settings are displayed. Tap Next to continue after
making any adjustments.
Battery Rating Default: CCA (Cold Cranking Amps)
Temperature
Select Fahrenheit or Celsius
Units
Decimal
Select decimal point or comma
Separator
The Location Selection screen (Admin Only) is displayed.
Scroll to find the correct location or tap
specfic location. Tap Next to continue.
The Configured WiFi Networks screen is displayed. By de-
fault "subtronics01" is displayed. Tap Next to continue.
Midtronics Inc.
7000 Monroe Street Willowbrook, IL 60527
Quick Start Guide
Page
1
March 2019
Quick Start Guide
167-000900EN-A
167-000900EN-A
March 2019
to search for a