Honeywell Fire-Lite Alarms MS-9200UDLSE Manual page 125

Maintenance Programming Level
MS-9200UDLS PN 52750:A 11/04/05
Pressing 1 while viewing the System Screen will cause the following screen to be
displayed:
TIME AND DATE
1=TIME
2=DATE
To change the time, press 1 to display the following screen:
01:00 AM
1=AM
A flashing cursor will appear on the left side of the display. Enter the four digit number
corresponding to the time (0000 - 1259). When the fourth digit is entered, the cursor
will move one position to the right. Press 1 for AM or 2 for PM to complete entering
the time. The display will return to the Time and Date Screen displaying the new time.
To change the date, press 2 while viewing the Time and Date Screen. The following
screen will be displayed:
MONTH DAY YEAR
01-01-2001
A flashing cursor will appear on the left side of the display. Enter the two digit month,
two digit day and four digit year. The cursor will move one position to the right after
each entry. When the fourth digit of the year has been entered, the display will return to
the Time and Date Screen which will show the new date.
01:00 AM
01-01-2001
12HR
Time and Date Screen
ENTER TIME
2=PM
Time Screen
ENTER DATE
Date Screen
Programming
125