Honeywell Fire-Lite Alarms MS-9200UDLSE Manual page 61

Master Programming Level
See Page
MS-9200UDLS PN 52750:A 11/04/05
If the selected address corresponds to a control module, a screen displaying
information about the control module with the selected address will be displayed as
shown in "Edit Module Screen for Control Modules" on page 68.
If the selected address corresponds to a monitor module, a screen displaying
information about the module with the selected address will be displayed as
illustrated in the following:
NORMAL MONITOR
EDIT MONITOR
1=ENABLED
2=TYPE
Edit Monitor Screen #2
EDIT MONITOR
1=PRE-SIGNAL
Edit Monitor Screen #3
EDIT MONITOR
1=WALKTEST
2=ZONE ASSIGNMENT
00 ** ** ** **
Edit Monitor Screen #4
EDIT MONITOR
1=ADJECTIVE/NOUN
2=DESCRIPTION
********************
Edit Monitor Screen #5
<ADJ><NOUN>
ZNNN
1M012
1M012
YES
MONITOR
1M012
NO
1M012
YES
1M012
Programming
61