Cisco UBR10012 Quick Start Manual page 9

Table 1
Table 1
Ordered Equipment
Fan module (Spare)
Fan module and Cisco uBR10012 chassis running unsupported
Cisco IOS Release
Fan module and Cisco uBR10012 chassis running supported
Cisco IOS Release
1. For information on Cisco IOS Releases that support the PRODUCT ID LED/switch feature, see the
Release Notes for Cisco IOS Release
When you press the PRODUCT ID LED/switch it illuminates (green) and the Cisco IOS software
identifies the fan assembly module as UBR10012-FAN-PLUS only if you are running a supported Cisco
IOS release on the chassis. Otherwise, the software reports the default UBR10-FAN-ASSY product part
number and a FAN-MISSING alarm may be randomly raised. To clear the alarm, see
section on page
Use a small object, such as a paper clip, to press the PRODUCT ID LED/switch inside the cavity on the
Tip
front panel of the fan assembly module.
If you are installing the fan module (spare) in an existing Cisco uBR10012 router chassis, ensure that
Note
the Cisco IOS Release running on the chassis supports the PRODUCT ID LED/switch feature before
installing the module.
Even if you are using a supported Cisco IOS release, the software may not identify the fan assembly as
Note
UBR10012-FAN-PLUS. If this occurs, ensure that the PRODUCT ID LED/switch is illuminated and
then either reload the software, or physically remove the fan assembly module for at least 1 minute and
then reinsert it.
Table 2
Table 2
Component
Power Consumption (Max)
Fans
Operating Speed Levels
LEDs
PRODUCT ID LED/switch
Weight
Label on Front Panel
OL-24972-01
lists the default activation status of the PRODUCT ID LED/switch when it is shipped.
PRODUCT ID LED/Switch Default Activation Status
1
12.2(33)SCE.
63.
summarizes the specifications of both the fan assembly modules.
Specifications of the Fan Assembly Modules
UBR10012-FAN-PLUS=
224 W
9
4
3
Yes
22 lbs (10 kg)
Blue
Cisco uBR10012 Series Universal Broadband Router–Quick Start Guide
Overview
PRODUCT ID LED/Switch Status
Activated
Not activated
Activated
Cisco uBR10012 Router
"Troubleshooting"
UBR10-FAN-ASSY=
185 W
4
2
3
No
30 lbs (3.16 kg)
White
9