Cisco UBR10012 Quick Start Manual page 54

Powering On the Cisco uBR10012 Router
Figure 28
ALAR MS
ALAR MS
Figure 29
Verify that the following LEDs are illuminated properly:
Step 7
DC PEM modules
•
•
Cisco uBR10012 Series Universal Broadband Router–Quick Start Guide
54
DC Power Switch on UBR10-PWR-DC=
DC Power Switch on UBR10-PWR-DC-PLUS=
E N A B L E
EN AB LE
CIS CO V1 PO W
100 00
CIS CO
100 00
V2 PO W
PO W ER
MI SW IR
FA UL T
UBR10-PWR-DC= module—The POWER LED on each PEM is illuminated (green), indicating
that power is being received and is being delivered to the chassis.
UBR10-PWR-DC-PLUS= module—The V1 POWER and V2 POWER LEDs on each PEM are
illuminated (green). In addition, the POWER LED on each PEM is illuminated (green),
indicating that power is being received and is being delivered to the chassis.
EN AB LE
ER
ER
V1 PO W
ER
V2 PO W
E ER
PO W ER
MI SW IR
E
FA UL T
OL-24972-01