Cisco UBR10012 Quick Start Manual page 16

Overview
The U-CHAS-COVER-PLUS= front cover must be used with the 3300 W DC PEM modules for proper
Note
routing of the DC cables through the chassis to the facility power source.
Figure 8
Two DC power terminal blocks—These connect to the facility power source.
•
DC power enable switch—This powers on the DC PEM module.
•
Two Handles—These help during the removal and installation of the DC PEM module.
•
External alarm connector—This is an input connector to monitor the alarms from the external
•
AC-input power shelf.
DC power cord clips—These help to secure the DC power cables.
•
Figure 8
2
5
5
1 DC power terminal blocks
2
DC power enable switch
3
Handles on the DC PEM
Cisco uBR10012 Series Universal Broadband Router–Quick Start Guide
16
shows the faceplate of this DC PEM module, which has:
DC Power Entry Modules (UBR10-PWR-DC-PLUS=)
1
3
6
4
5
3
4 External alarm connector
5
DC power cord clips
6
PRODUCT ID LED/switch
OL-24972-01