Installation - HMS Anybus Wireless Bolt Installation Manual

Installation

2 Installation
Anybus Wireless Bolt should be mounted vertically (logo facing upwards) for best
performance due to the characteristics of the internal antenna.
For optimal reception, wireless devices should be placed with a line of sight be-
tween them clear of obstructions. A minimum distance of 50 cm between the de-
vices should be observed to avoid interference.
Make sure that you have all the necessary information about the capabilities and
restrictions of your local network before installing Anybus Wireless Bolt. Contact
your network administrator if in doubt.
Anybus ® Wireless Bolt ™
Caution
This equipment emits RF energy in the ISM (Industrial, Scientific,
Medical) band. Make sure that all medical devices used in proximity to
this device meet appropriate susceptibility specifications for this type of
RF energy.
This product contains parts that can be damaged by electrostatic
discharge (ESD). Use ESD protective measures to avoid equipment
damage.
Installation Guide
4 (16)
SCM-1202-006/SP2139 1.7