Led Indicators For System Status/Led 指示灯/Led 指示燈 - Advantech ACP-4010 User Manual

3.1.2 LED Indicators for System Status/LED 指示灯/LED 指示燈
Six LEDs are placed on the left side of the front panel to indicate system health and
activity. Please refer to Table 3.1 for the LED definition summary.
六个 LED 位于前面板的左侧，能够显示系统是否正常运行及运行状态。LED 的描述请
参考表 3.1。
六個 LED 位於前面板的左側，能夠顯示系統是否正常運行及運行狀態。LED 的描述請
參考表 3.1。
Table 3.1: LED indicator functions/LED 指示灯功能/LED 指示燈功能
LED
Power
电源
電源
Fan
风扇
風扇
Temperature
温度
溫度
Hard Disk
硬盘
硬碟
LAN
When the system power is on, the power LED is always Green.
When the power LED is RED, it indicates a redundant power supply module failure.
To stop the alarm beep, press the Alarm Reset button. Examine the redundant
power supply module right away and replace the failed module with a good one.
When the fan LED is RED, it indicates a failed cooling fan, and the alarm is also acti-
vated. To stop the alarm beeping, press the Alarm Reset button and then replace the
failed fan with a good one immediately.
If the temperature LED is RED, it means that inside of the chassis is overheated
(more than 50 °C/122 °F). An audible alarm will be activated. To stop the alarm beep-
ing, press the Alarm Reset button. Inspect the fan filter and the rear section of the
ACP-4010 User Manual/用户手册/用戶手冊
Description
描述
System power
系统电源
系統電源
Cooling fan status
冷却风扇状态
冷卻風扇狀態
Temperature in the chassis
机箱内温度
機箱內溫度
Hard disk drive activity
硬盘驱动状态
硬碟運作狀態
LAN1 & LAN2 status
LAN1 & LAN2 的状态
LAN1 & LAN2 的狀態
Data transmit through LAN
经由 LAN 的数据传输
經由 LAN 的數據傳輸
Green Red
绿色 红色
綠色 紅色
Normal Abnormal
正常 异常
正常 異常
Abnormal
Normal
异常
正常
異常
Abnormal
Normal
异常
正常
異常
Data access No light
读取数据 (无光)
數據讀取 (無燈)
Normal
No light
正常
(无光)
Blinking
(無燈)
闪烁
閃爍