Preset Energy-Saving Schedules; Setting The Clock - Honeywell Home RTH2510 Series Owner's Manual

Set the Time and Day
1. Press the SET button, then press
s or t to set the clock time.
2. Press the SET button, then press
s or t to select the day of the
week.
3. Press RUN to save & exit.
If the clock flashes, the
NOTE:
thermostat will follow your settings
for the Monday "Wake" time period
until you reset the time and day.
Program Schedule
You can program four time periods each day, with different settings for
weekdays and weekends. We recommend the pre-set settings (shown in the
table below), since they can reduce your heating/cooling expenses.
Wake - Set to the time you
awaken and the temperature
you want during the morning,
until you leave for the day.
Leave - Set to the time
you leave home and the
temperature you want while you
are away (usually an energy-
saving level).
Return - Set to the time
you return home and the
temperature you want during
the evening, until bedtime.
Sleep - Set to the time you go to bed and the temperature you want overnight
(usually an energy-saving level).
NOTE: Leave and Return periods can be canceled on weekends.
Set
Hold
Run
Set
Hold
Run
Heat
70
Wake
(6:00 am)
62
Leave
(8:00 am)
70
Return
(6:00 pm)
62
Sleep
(10:00 pm)
12
Set Time
6 : 30
am
Set Day
We
Cool
° 78 °
° 85 °
° °
78
° 82 °
M33598
M33599