Setting System Mode; Preset Energy-Saving Schedules - Honeywell Home RTH9600WF User Manual

Setting system mode

MODE
1 Touch to display system settings.
2 Touch desired option:
Heat: Thermostat controls only the heating system.
Cool: Thermostat controls only the cooling system.
Off: Heating/cooling systems are off.
Automatic: Thermostat selects heating or cooling as
needed depending on the indoor temperature.
Emergency Heat (heat pumps with aux. heat):
Controls auxiliary/emergency heat. Compressor is
locked out.
3 Touch Done to save and exit.
Note: The Automatic and Emergency Heat system settings may not appear, depending on how your
thermostat was installed. See Auto Changeover on page 31.

Preset energy-saving schedules

This thermostat uses default Energy Saver settings that can reduce your heating/cooling expenses.
To customize settings, see next page.
Period
Wake
Leave
Return
Sleep
Period
Occupied 1
Unoccupied 1
Occupied 2*
Unoccupied 2*
* Period 2 is cancelled by default. If you activate it, the values shown above are default settings.
69-2715EF—07
33-00593ES_A.indb 20 33-00593ES_A.indb 20
Heat
Start time (Mon-Fri)
6:00 am 70°
8:00 am 62°
6:00 pm 70°
10:00 pm 62°
Start time
8:00 am
10:00 pm
12:00 am
12:00 am
Done
Cool Heat
(Mon-Fri) (Sat-Sun)
78° 70°
85° 62°
78° 70°
82° 62°
Heat Cool
70° 75°
55° 85°
70° 75°
55° 85°
20
MODE
Cool
(Sat-Sun)
78°
85°
78°
82°
Fan
On
Auto
On
Auto
9/20/2021 7:09:53 PM 9/20/2021 7:09:53 PM