Time Signal Analysis - Omicron DANEO 400 User Manual

DANEO 400
5.2.2

Time signal analysis

The list of devices and their recorded signals appear in the Navigation pane. By drag and drop or
through double click, the signals are displayed in different types of diagrams.
Available diagrams:

Instantaneous signals: Instantaneous, cursor, and calculation

RMS, DC: The according value as time diagram, cursor, and calculation

Phasor: Magnitude and phase time diagram, cursor, and calculation

df/dt: f, df/dt cursor, and calculation

Binary: Binary trace, and GOOSE packets for a mapped binary signal

Traffic: Byte/s, packets/s, cursor, and calculation
The following figure shows an example of a time signal analysis displaying analog and binary signals.
The cursor diagram shows the signal's values and/or components at the selected cursor's position.
The calculation diagram can additionally perform basic calculation operations (addition, subtraction,
division, multiplication) based on the cursor position values.
The GOOSE packets diagram is available for mapped binary signals from GOOSE. It displays
information about the GOOSE packet that caused the current state of the binary signal at the selected
cursor.
54
Figure 25: Example of a time signal analysis