Table of Contents
Advertisement
DANEO Control
License update
There are two licenses for a DANEO 400 device. With the basic license you can measure and record
conventional (analog and binary) signals. With the standard license you can additionally measure and
record traffic from power utility communication networks and you get the IEC 61850 capabilities.
Figure 24: License update
A license update is used to add IEC 61850 and network capabilities to a device with a basic license.
Licenses are associated with the serial number of a device, so you can use a license file only for the
device it is meant for. Because of that, you can only select one device at a time for license update.
The license update has restrictions similar to the firmware update (configurable, not being armed,
etc.). As with the firmware update, all other actions are blocked during a license update.
If the license file is invalid, DANEO 400 will report an error and is reverted to basic license.
Note: The device may be rebooted during the license update.
49
Advertisement
Table of Contents
