Omicron DANEO 400 User Manual page 36

DANEO 400
The verification results are updated in real time and classed by means of three different icons.
Found
Found with differences
Not found
To start the verification, in the Navigation pane, click Start. To clear the verification results and any
unassociated orphans, click Clear.
Issues during the verification
GOOSE or SV streams were found
with differences.
GOOSE or SV streams were found,
but do not match any GOOSE or SV
streams loaded from the SCL file.
Associating an orphan with an IED
When you select an orphan in the Verification section of the Navigation pane, the orphan details are
displayed. The orphan can be associated with an IED. In this case, from the IEDs list, select the target
IED, and then click
Tip: The orphan can also be dragged from the Verification section directly onto the appropriate IED
in the Navigation pane.
36
The control block reference (GOOSE) or SVID (SV), the data set,
and the header match.
The control block reference (GOOSE) or SVID (SV) match, but not
the data set or header.
The control block reference (GOOSE) or SVID (SV) was not found.
In the System Under Test section, for comparison
purposes, the GOOSE or SV streams found with
differences are placed to the right of the GOOSE or SV
streams loaded from the SCL file.
GOOSE or SV streams loaded from the SCL file can be
replaced entirely by the GOOSE or SV streams found with
differences.
This GOOSE or SV stream is an orphan and can be
associated with an IED.
. There, you can also associate the orphan to a new IED by clicking
Result
.