Raven SC1 Calibration And Operation Manual page 60

CHAPTER 8
Code ID
1504 .2
5243 .2
.16
74
.0
87 .0
841 .11
523832 .0
5613 .2
523842 .31
841 .15
523827 .0
701 .3
5241 .31
523839 .31
523830 .31
5613 .13
5613 .11
841 .0
523843 .0
522250 .2
56
Display Name
Operator Not Present
Master Switch Off
Max Speed Warning
Max Speed Shutdown
Max Speed Engage
GPS Position Error
GPS Mode Not Unlocked
INS Data Invalid
Libaility Acceptance
Poor GPS Pos Accracy
Rev Steer No Support
Resume Switch Stuck
Disengage Switch Off
Tuneset Not Released.
Steering Not Unlcked.
3D Not Calibrated
No Field 3D Cal.
GPS Not Converged.
Lost Internal Comm.
SWATH JUMP.
Raven SC1™/TC1™ Calibration & Operation Manual for Towed Implements
Description
Operator presence switch indicates that the
operator is not present.
Master Switch is turned off.
Vehicle speed has exceeded the warning
threshold for the calibrated platform.
Vehicle speed has exceeded the warning
threshold for the calibrated platform and
has shutdown.
RS1 cannot be engaged over 18 mph.
GPS position is currently invalid.
The differential correction mode requested
is not unlocked.
System is unable to measure data from
inertial sensors.
RS1/SC1/TC1 Liability has not been
accepted.
The user set position accuracy has been
reached or passed. Performance may not be
as desired.
Reverse steering is not supported for this
machine.
The resume switch has been in the on
positoin for too long. If this problem
persists, contact dealer.
The disengage switch is currently off. If this
persists, contact dealer.
The selected tuneset has not been released
yet. Contact dealer for updates on this
tuneset.
Steering has not been unlocked. To use the
steering feature, contact dealer for an
unlock code.
Terrain Compensation has not been factory
calibrated. If this problem persists, contact
dealer.
Recalibrate terrain compensation.
GPS has not converged. This can take up to
30 minutes. If this problem persists, contact
dealer.
The is no communication between the SOM
and the SGC. This could affect RTK streams
and file management. If this problem
persists, contact dealer.
A swath jump has been detected.