Raven SC1 Calibration And Operation Manual page 17

Plough steering

Hide thumbs Also See for SC1:

Table of Contents

FIGURE 8. Antenna Fore/Aft Screen

4. Select the value box to enter the Antenna Fore/Aft position.

NOTE:

The Antenna Fore/Aft Offset is measured from the rear axle to the center of the GPS antenna. A

negative value should be entered if the GPS antenna is located behind the rear axle.

5. Select the Next button.

FIGURE 9. Antenna Shift Screen

6. Select the value box to enter the Antenna Center Offset position.

NOTE:

The Antenna Center Offset is measured from the centerline of the tractor to the center of the GPS

antenna. A negative value should be entered if the GPS antenna is located to the left of the centerline.

7. Select the Next button.

Initial Implement Calibration: Initial Implement Calibration

INITIAL IMPLEMENT CALIBRATION

Table of Contents

Tc1