Raven SC1 Calibration And Operation Manual page 20

CHAPTER 3
FIGURE 14. Terrain Compensation Calibration
1. Drive the machine forward at least 33 feet [10 m] and park on a flat surface.
NOTE: The SC1/TC1 system must detect the direction of forward travel to properly calibrate the terrain
compensation features.
2. Stop the machine on a level surface.
3. Place flags or markers on the outside of each wheel of the fixed axle of the machine.
•
Rear axle - Front boom sprayers, rear boom sprayers, and front-steered machines
4. Select the Next button and follow the on-screen instructions to begin the terrain compensation calibration.
FIGURE 15. Terrain Compensation Calibration
5. Select the Calibrate button to begin the calibration process. The progress of the terrain compensation
calibration will be displayed on the screen. Wait for the calibration process to be completed before moving the
machine.
6. Drive forward and turn the implement around (180°). Park the machine, between the markers facing in the
opposite direction as when the Calibrate button was first selected. Make sure the markers are aligned with the
fixed axle on opposite sides of the machine
NOTE: The two triangles on the display should line up on top of each other when the implement is in the
correct position.
16 Raven SC1™/TC1™ Calibration & Operation Manual for Towed Implements