Optional Msc, Fp, Plim, Sip, And Spa Product Ids - Cisco CRS-1 Site Planning Manual

Appendix B Product IDs for the Cisco CRS 8-Slot Line Card Chassis
Table B-1 8-Slot Routing System Component Product IDs (continued)
Component
Route processor
3
(RP)
Route processor, redundant
Route processor memory
Route processor blank
Performance route processor
4
(PRP)
Route processor handle
1. PEM = power entry module
2. PM = power module
3. RP = route processor
4. PRP = performance route processor

Optional MSC, FP, PLIM, SIP, and SPA Product IDs

Table B-2
interface modules (PLIMs) available for the Cisco CRS 8-slot LCC.
Table B-2
Component
MSC
FP card
MSC impedance carrier CRS-MSC-IMPEDANCE(=) Blank card carrier for each empty MSC slot
1. Refer to the product data sheet for ordering details.
OL-5802-09
Product ID
CRS-8-RP(=)
CRS-8-RP/R(=)
CRS-MEM-2G(=)
CRS-MEM-4G(=)
CRS-8-RP-BLANK(=)
CRS-8-PRP-6G(=)
CRS-8-PRP-12G(=)
CRS-8-RP-HANDLE(=)
and Table B-3 list the product IDs for the modular services cards (MSCs) and physical layer
MSC Component Product IDs
Product ID
1
CRS-MSC-B(=),
CRS-MSC-140G(=)
FP40
FP-140
Book TCisco CRS Carrier Routing System 8-Slot Line Card Chassis Site Planning Guideitle
Optional MSC, FP, PLIM, SIP, and SPA Product IDs
Description
Cisco CRS RP card
(one required for each chassis;
for redundant operation, you also need CRS-8-RP/R=)
Optional route processor for redundant RP operation
(one required for each chassis, along with CRS-8-RP=)
RP memory module, 2 gigabytes
RP memory module, 4 gigabytes
Blank card carrier for each route processor slot
(used during shipment, must be replaced by a route processor
card)
Cisco CRS performance route processor card
Handle for carrying card (spare)
Description
Cisco CRS Layer 3 modular service card
(every MSC must have an associated PLIM)
Cisco CRS Layer 3 forwarding processor
(every FP must have an associated PLIM)
(required for EMI compliance and cooling)
B-3