Troubleshooting - SC&T HE02EX User Manual

Trouble Shooting
1. The wiring must away from any equipment with electromagnetic wave, i.e.: mobile phone, microwave,
radio equipment, fluorescent lamp, high voltage power lines.
2 Under HDMI 2.0 mode, must use Premium certified HDMI cable.
3 EDID pass through for HE02EXT transmitter input and HE02EXR receiver output 1 only.
4. CEC works for HE02EXT transmitter input and HE02EXR receiver output 1 only.
5. Under HDCP 2.2 mode: any one monitor HDCP authorization failed will cause no video status, other
connecting monitors will be also failed. Then monitor testing must be one by one to find which
monitor HDCP failed.
6. This device HDBaseT port is not general Ethernet signal; do not connect with Network devices to avoid
damage.
7. IR transmitter do not put near from receiver to avoid mutual interference.
5
User Manual
HE02EX