Gsm-Abis Set Dscp - Cisco 3825 Software Configuration Manual

gsm-abis set dscp

gsm-abis set dscp
To mark a packet by setting the differential services code point (DSCP) for GSM-Abis, use the gsm-abis
set dscp Interface configuration command.
Note Use this command when configuring GSM shorthaul interfaces.
Syntax Description value
Defaults There are no default settings or behaviors.
Command Modes Interface configuration
Command History Release
12.4(4)MR
Examples The following example shows how to set a retransmit delay of 100 ms:
Router(config)# interface Serial10/1/0.0
Router(config-if)# encapsulation gsm-abis
Router(config-if)# gsm-abis local 10.10.10.1 5504
Router(config-if)# gsm-abis remote 10.10.10.2 5504
Router(config-if)# gsm-abis set dscp cs2
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
A-34
gsm-abis set dscp value
A number from 0 to 63 or hex value that sets the GSM-Abis DSCP value.
Modification
This command is introduced.
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
OL-15667-03