Cisco 3825 Software Configuration Manual page 163

Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
gsm-abis local
To configure the local parameters required to establish an Internet Protocol/User Datagram Protocol
(IP/UDP) backhaul connection, use the gsm-abis local Interface configuration command.
Syntax Description ip-address
port
Defaults There are no default settings or behaviors.
Command Modes Interface configuration
Command History Release
12.4(2)MR
Examples The following example shows how to configure the local parameters:
Router(config)# interface Serial10/1/0.0
Router(config-if)# encapsulation gsm-abis
Router(config-if)# gsm-abis local 10.10.10.2 5502
Related Commands Command
gsm-abis remote
OL-15667-03
gsm-abis local [ip-address] [port]
(Optional) The IP address for the entry you wish to establish.
(Optional) The port you want to use for the entry you wish to establish.
Modification
This command was introduced.
Description
Configures the remote parameters for an IP/UDP backhaul
connection.
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
gsm-abis local
A-31