Umts-Iub Congestion-Control - Cisco 3825 Software Configuration Manual

umts-iub congestion-control

umts-iub congestion-control
To enable control under the UMTS shorthaul interface, use the umts-iub congestion-control Interface
configuration command.
Syntax Description This command has no arguments or keywords.
Defaults
There are no default settings or behaviors.
Command Modes Interface configuration
Command History Release
12.4(4)MR1
Examples
The following example shows how to enable congestion control under UMTS shorthaul interface:
Router(config-if) umts-iub congestion-control
Related Commands Command
umts-iub congestion control
priority
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
A-124
umts-iub congestion-control
Modification
This command was introduced.
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
Description
Configures the congestion control priority under UMTS.
OL-15667-03