Show Atm Cell-Packing - Cisco 3825 Software Configuration Manual

Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference

show atm cell-packing

To display cell packing information for the Layer 2 attachment circuits (ACs) configured on your system,
use the show atm cell-packing command in the EXEC mode.
Syntax Description This command has no arguments or keywords.
Command Modes
EXEC
Command History Release
Release 3.4.1
12.4(12)MR2
Examples
The following sample output is from the show atm cell-packing command:
Router# show atm cell-packing
ATM0/2/0/1.200
ATM0/2/0/1.300
Related Commands Command
cell-packing
atm cell-packing
OL-15667-03
show atm cell-packing
Modification
This command was introduced on the Cisco XR 12000 Series Router.
This command was integrated into Cisco IOS Release 12.4(12)MR2.
Circuit
Type
vc 1/200
vc 1/300
avg #
local cells/pkt negotiated
MNCP rcvd MNCP
1 0
1 0
Description
Packs multiple ATM cells into each MPLS or L2TPv3 packet.
Packs multiple ATM cells into each MPLS or L2TPv3 packet.
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
show atm cell-packing
avg #
cells/pkt MCPT
sent (us)
1 0
1 0
50
50
A-73