Cisco 3825 Software Configuration Manual page 196

mpls ip
For an LC-ATM interface, the no form of this command prevents the establishment of label virtual
circuits (LVCs) beginning at, terminating at, or passing through the interface.
Examples The following example shows that label switching is enabled on the specified Ethernet interface:
Router# config t
Router(config)# configure terminal
Router(config-if)# interface Ethernet 0/1/0
Router(config-if)# mpls ip
Router(config-if)# exit
Router(config)# exit
Related Commands Command
mpls ldp maxhops
show mpls interfaces
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
A-64
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
Description
Limits the number of hops permitted in an Label Switched Path (LSP)
established by the downstream-on-demand method of label
distribution.
Displays information about one or more interface that has been
configured for label switching.
OL-15667-03