Docsis 2.0 Samis Ecr Data Set; Docsis Set-Top Gateway Issue - Cisco uBR10012 Software Configuration Manual

Chapter 1 Overview of Cisco uBR10012 Universal Broadband Router Software
Syntax Description cpe-num
For additional command information, refer to the
to the

DOCSIS 2.0 SAMIS ECR Data Set

The Usage-Based Billing feature for the Cisco Cable Modem Termination System (CMTS) provides
subscriber account and billing information in the Subscriber Account Management Interface
Specification (SAMIS) format. The SAMIS format is specified by the Data-over-Cable Service Interface
Specifications (DOCSIS) Operations Support System Interface (OSSI) specification.
Release 12.3(17a)BC provides enhancements to the OSSI specifications, and billing reports (billing record
format), added support to the CISCO-CABLE-METERING-MIB, which contains objects that provide
subscriber account and billing information in the Subscriber Account Management Interface Specification
(SAMIS) format, added support for DCC and DCC for Load balancing and Downstream LLQ.
For additional information, refer to the following document on Cisco.com:
•

DOCSIS Set-Top Gateway Issue 1.0

Cisco IOS Release 12.3(9a)BC introduces support for DOCSIS Set-Top Gateway (DSG) Issue 1.0 on the
Cisco uBR10012 universal broadband router. The DOCSIS Set-Top Gateway (DSG) feature allows the
Cisco CMTS to provide a class of cable services known as out-of-band (OOB) messaging to set-top
boxes (STBs) over existing DOCSIS networks. This allows MSOs and other service providers to
combine both DOCSIS and STB operations over one, open, vendor-independent network, without any
change to the existing network or cable modems.
DSG is a CableLabs® specification that allows the Cisco CMTS to provide a class of cable services
known as out-of-band (OOB) messaging to set-top boxes (STBs) over existing Data-over-Cable Service
Interface Specifications (DOCSIS) cable networks. DSG 1.0 allows cable Multi-System Operators
(MSOs) and other service providers to combine both DOCSIS and STB operations over a single, open
and vendor-independent network without requiring any changes to the existing DOCSIS network
infrastructure.
At the time of this Cisco publication, the CableLabs® DOCSIS DSG specification is in the current status
of "Issued" as characterized by stability, rigorous review in industry and cross-vendor interoperability.
For additional information about configuring and using DSG 1.0 on the Cisco uBR10012 router, refer to
the following document on Cisco.com:
•
Advanced-mode DOCSIS Set-Top Gateway Issue 1.1
Cisco IOS Release 12.3(13a)BC introduces support for DOCSIS Set-Top Gateway (DSG) Issue 1.1 on
the Cisco uBR10012 router. DSG 1.1 builds on and supports the enhancements of DOCSIS Set-Top
Gateway Issue 1.0 in the prior Cisco IOS 12.3(9a)BC release.
OL-1520-05
Specifies the number of CPEs. Valid range is 1 to 254.
Cable Modem Termination System Feature
Usage-Based Billing for the Cisco CMTS
http://www.cisco.com/en/US/docs/cable/cmts/feature/ubrsamis.html
DOCSIS Set-Top Gateway for the Cisco CMTS
http://www.cisco.com/en/US/products/hw/cable/ps2217/products_feature_guides_list.html
Supported Software Features for the Cisco uBR10012 Router
Cisco CMTS IOS Cable Command Reference Guide
Guide, both on Cisco.com.
Cisco uBR10012 Universal Broadband Router Software Configuration Guide
and
1-65