Snmp-Server Enable Traps Ipran - Cisco 3825 Software Configuration Manual

Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference

snmp-server enable traps ipran

To enable all ipran notifications via Simple Network Management Protocol (SNMP) notifications (traps)
available on your system, use the snmp-server enable traps ipran command in global configuration
mode. To disable ipran alarm-gsm notifications, use the no form of this command.
Related Commands
This command has no arguments or keywords.
Defaults
This command is disabled by default. No notifications are sent.
Command Modes Global configuration
Command History Release
12.4(2)MR1
Examples The following is an example of the output generated by this command.
Router(config)# snmp-server enable traps ipran
Related Commands Command
snmp-server enable traps
ipran alarm-gsm
snmp-server enable traps
ipran alarm-umts
snmp-server enable traps
ipran util
OL-15667-03
snmp-server enable traps ipran
no snmp-server enable traps ipran
Modification
This command was introduced.
Description
Provides information alarms associated with GSM-Abis interfaces.
Provides information alarms associated with UMTS-Iub interfaces.
Provides information on backhaul utilization.
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
snmp-server enable traps ipran
A-115