Delayed Output; Factory; Information - SHOWTEC Helix M1000 Q4 Mobile Manual

Helix M1000 Q4 Mobile

6.8. Delayed Output

With this menu you can set the amount of time that needs to pass before the light output becomes
activated.
01) Press the UP/DOWN buttons to select the output delay time between 00H00M–24H00m, in increments
of 30 minutes.
02) Press the SET button to confirm. The display will show:
03) Press the UP/DOWN buttons to select ON or OFF.
04) Press the SET button to confirm. If you have chosen ON, the device will wait for the determined
amount of time and then it will activate its light output.

6.9. Factory

With this menu you can restore the default factory settings.
01) Press the UP/DOWN buttons to select YES or NO.
02) Press the SET button to confirm your choice.

7. Information

With this menu you can view the device's current software version, temperature, total lifetime and the
type of DMX signal.
01) While in the main menu, press the UP/DOWN buttons to choose INFORMATION.
02) Press the SET button to enter the menu. The display will show:
03) Press the UP/DOWN buttons to toggle through the screens.
Ordercode: 43740 31