Table of Contents
Advertisement
Helix M1100 Q4 Mobile
Calibration
In this menu you can manually calibrate the desired color.
01) Press the UP/DOWN buttons to select the parameter.
Press the SET button to confirm the selection and open the submenu.
Press the UP/DOWN buttons to increase/decrease the values:
●
RED:
●
GREEN:
●
BLUE:
●
WHITE:
You can combine Red, Green, Blue and White to create an infinite range of colors (0–255).
Press the SET button to confirm your choice.
Note:
If you change the values for a predefined white color in this submenu, the colors in the respective DMX
channel will be changed as well.
Delayed Output
In this menu you can set the amount of time that needs to pass before the light output becomes
activated.
01) Press the UP/DOWN buttons to select the output delay time between 00H00M–24H00m, in increments
of 30 minutes
02) Press the SET button to confirm your choice. The display will show:
03) Press the UP/DOWN buttons to set the desired delayed output. Choose one of the 2 options:
●
ON:
The device will wait for the determined amount of time and then it will activate its light
output.
●
OFF:
Delayed Output is inactive.
04) Press the SET button to confirm your choice.
Product code: 43749
Set the intensity of the red color. The adjustment range is 0–255, from low to
high intensity
Set the intensity of the green color. The adjustment range is 0–255, from low
to high intensity
Set the intensity of the blue color. The adjustment range is 0–255, from low to
high intensity
Set the intensity of the white color. The adjustment range is 0–255, from low
to high intensity
44
Advertisement
Table of Contents
