Intelligent Flight Features - Autel Robotics Dragonfish Pro User Manual

Flight Mode
Automatic flight
Manual flight

2.1.6 Intelligent flight features

Intelligent tracking

Intelligent tracking uses deep learning algorithms to automatically track selected target.
Pointed flight

Select a target point in the camera interface frame, then Dragonfish Pro can fly to the target point
at a speed and height.
Terrain following

The route generated by the system can be automatically adjusted according to the elevation
fluctuations of the terrain, ensuring that the altitude difference between the route and the ground is
always at or above the set safe distance.
Auto return

The return function is enabled only when there is good GPS signal. To enable the auto return
function manually, press and hold the return button (Go Home) (
3s. The aircraft will turn towards the return point and return according to the current setting.
Fail-safe

The fail-safe function is to help Dragonfish Pro to return automatically or land at its current
position when necessary. The fail-safe will be activated in the following situations:
Communication outage

If the communication between the aircraft and the remote controller is interrupted, the fail-safe
function will be activated.
If there is available GPS signal when the fail-safe function is activated, the aircraft will enable the
auto return function. Otherwise the aircraft will land on the spot. After communication is
restorated, you can resume the control on the aircraft.
Low battery of aircraft

In any of the following low battery situations, the fail-safe will be activated.
A. The aircraft will continuously calculate the battery level required to the return point. When the
battery level reaches the maximum level required to the return point, The fail-safe will be
activated and start the return process.
B. When the aircraft battery level reaches the set threshold (25% by default), you will receive one
low battery alarm, and the fail-safe will be activated to start the auto return of aircraft. If you
Flight Mode
The ground station is switched to gear A, and the aircraft performs a fully
autonomous task flight without remote control.
The ground station is switched to gear M, the user can manually remotely
control the flight, and the aircraft is located by GPS.
Description
) on the remote controller for
17