Only use the battery and charger provid- various applications and environments. The ed by Autel Robotics. It is prohibited to Dragonfish RTK base station allows for centime- modify the battery pack and its charger, ter-level positioning accuracy, and provides or use third-party equipment to replace it.
�. Antenna N-type connector ��. Tripod mounting hole Base station � �pc ��. Heat outlet tray Base station � �pc tripod Tripod �. Mounting plate � �pc Power Adapter screw �. Friction control lock �. Leg column USB Type C �...
Page 4
How to use the base station Turning the base station on/off Connection method Turning on When using the normal mode, follow the instruc- The base station has two working modes, tions below. namely normal mode and disabled RTK mode. Both can be used for different operating scenar- 1.Base station and aircraft frequency ios.
Page 5
Setting up the Dragonfish base station Choose an open area to set up the base station and allocate a mark on the ground (aligning the center of the tripod with the center of the mark point) so that the base station can be accurately reset after being moved.
Page 6
How to use the Dragonfish base station �. Adjust the base station to a suitable height. �. Power on the base station and wait for the system to complete initialization. �. Power on the ground station and aircraft, and make sure that Autel Voyager is running. �.
+ extension rod) properties Weight ����g Dustproof and waterproof IP�� Operating ��°C to ��°C temperature NOTE: This content may be updated without prior notice. You can check the latest version on the official website of Autel Robotics at www.autelrobotics.com...
Need help?
Do you have a question about the Dragonfish and is the answer not in the manual?
Questions and answers