Item list Aircraft body 9.7-inch ground station Base station 4pcs Battery (the actual quantity is subject to the purchased set) Charger + AC line Propeller blades 2pairs Base station antenna 2pcs Base station feeder 2pcs Base station tray ��...
Page 5
Repair tool kit Gimbal Camera (The gimbal model is subject to the actual set purchased) Ground station charger Wing set 1pairs Tail Ground station lanyard 1set Documentation x 1 set Tail (includes Dragonfish Pro, Base station, Charger, Battery quick guide, Disclaimer) ��...
The Dragonfish Pro offers a maximum flight time of up to 180 minutes and a video transmission range of 30 km. It comes built in with a range of intelligent features such as automatic take-off and landing, intelligent tracking, terrain follow and more.
➆ Gimbal camera Getting to know the portable ground station The Dragonfish Pro is equipped with a 9.7-inch TFT-LCD touch screen (2048*1536). It offers a brightness of 1000 cd/m2, making it almost twice as bright as typical mobile devices. The screen can display images clearly even in direct sunlight, and a built-in 256G memory makes it convenient for storing all your critical data.
➇ Port cover ➁ Linking indicator ➅ Frequency button ➈ Antenna interface ➂ RTK indicator ➆ Power button ➉ Tripod interface ➃ Power indicator Using the Dragonfish Pro Charging 1. Charging the Intelligent flight battery �. Charging the ground station ��...
3. Charging the base station Setting up the base station 1. Unfold the tripod, install the base station tray, and lock the tray. 2. Install the base station body to the tray 3. Install the antenna on the tripod and and tighten the lock on the tray nut.
Assembling the aircraft 1. Install the left and right wings Align and fasten Align and fasten 2. Install the tail Align and fasten ��...
Page 11
3.Install the wingtip propeller ▶ ▶ Mount on the base Press and rotate the paddle Install to the locked position Locking direction: Press and Rotate in the indicated direction to lock the propeller. Unlocking direction: Press and Rotate the propeller in the opposite direction to unlock it. The marked propeller is to be mounted on the marked motor Unmarked propeller is to be mounted on the unmarked motor 4.
6. Installing the intelligent Flight Battery When installing or removing the aircraft battery, be sure to power off the aircraft. Align the battery to the battery interface on the fuselage and install it. Powering on / Activating the aircraft 1. Powering on the base station 2.
Flight Enter the Autel Voyager safe flight interface. Before taking off, please place the aircraft on a flat surface with the tail facing towards you. Manual takeoff 1. Switch the ground station gear to M gear. 2. Check the aircraft system status. 3.
�. Aircraft system status check �. Flight interface display Specifications Aircraft Size 1.65x3.04x0.46 m Weight (including two batteries, 14.5 kg without gimbal) Single battery weight 3.6kg Maximum load 2.5 kg Maximum take-off weight 17.0 kg Working frequency 902-928 MHz; 2.4000-2.4835 GHz; 5.725-5.755GHz Maximum angular velocity Pitch: 180°...
Page 15
Maximum flight time 180 min Supported Payloads DG-Z2, T3, T3H, L20T, L50T Supported Gimbal Configurations Fast Disassembly Ingress Protection Rating IP43 GNSS GPS + GLONASS + BeiDou + Galileo Working temperature -20° C to 50° C EIRP (Equivalent radiated power) 900 MHz FCC: <30 dBm;...
Page 16
Digital transmission Working frequency 5.725 - 5.755 GHz Wi-Fi parameters Protocol Wi-Fi Direct, Wi-Fi Display, 802.11a/g/n/ac Supports 2 x 2 MIMO Wi-Fi Working efficiency 2.400 - 2.4835 GHz 5.150 - 5.250GHz 5.650 - 5.755GHz 5.725 - 5.850 GHz Other parameters Battery Name: Lithium polymer Battery Capacity: 8200mAh Voltage: 11.4 V...
Page 17
GNSS receiver Satellite receiving frequency Simultaneously receive: GPS: L1, L2, L5 BeiDou: B1, B2, B3 GLONASS: F1, F2 Galileo: E1, E5A, E5B Positioning accuracy Single Point Horizontal: 1.5 m (RMS) Vertical: 3.0 m (RMS) Horizontal: 1 cm+1 ppm (RMS) Vertical: 1.5 cm + 1 ppm (RMS) 1 ppm: For every 1 km increase in distance, the accuracy will be 1 mm less.
Page 18
Physical properties Dimensions 193 mm×177 mm×73 mm (base station body + extension rod) Weight 1275g Ingress protection IP64 Working temperature -20°C to 50°C Image transmission parameters Working efficiency 902-928 MHz; 2.4000-2.4835 GHz EIRP (Equivalent radiated power) 902-928 MHz FCC:< 30 dBm 2.400-2.4835 GHz FCC:<...
Need help?
Do you have a question about the Dragonfish Pro and is the answer not in the manual?
Questions and answers