Table of Contents
Advertisement
4-17. Adjusting the electronic intermediate presser stroke
❶
❷
❸
It is necessary to adjust the intermediate presser
stroke (A) appropriately since there would be the
need for preventing stitch skipping depending on
A A
thickness or type of the material.
1)
2)
3)
– 47 –
❶ on the main screen of electrical
Press
box.
When you press the "Machine setting parame-
ter", ❷ is displayed.
When you enter the password "11111111",
screen ❸ is displayed.
On the screen that is displayed by pressing the
"Presser follow-up setting", set the parameter
(the follow-up height of presser foot has been
factory-adjusted to 3 mm at the time of ship-
ment).
Advertisement
Table of Contents
