Mounting Cell Holder For Reference - Hitachi UH5300 Instruction Manual

1.4 Reverse Process to Change Auto Sipper to 6 Cell Turret

1.4.6 Mounting Cell Holder for Reference

External view of sample compartment
Confirm that there is no level difference at the juncture between the
sample compartment front cover and the upper part of the instrument
checking that the cover of the sample compartment is closable.
Fig. 1-39 After Attaching Sample Compartment Front Cover
(1) Check the mounting bar for the cell holder for reference located
back of the sample compartment. Align the locating pins on the
bottom of the cell holder for reference with the second and
fourth holes from the right on the mounting bar, and then insert
that cell holder.
Fig. 1-40 Mounting Cell Holder for Reference
1 - 22
Confirm that the sample compartment
front cover is attached without level
difference with the instrument at the
portion indicated by ○.
(4)
Mounting bar for cell holder for reference
(4)
Cell holder for reference
(2)
(2)