Mounting Auto Sipper - Hitachi UH5300 Instruction Manual

1.3.6 Mounting Auto Sipper

Cable cover
(1) In handling the Auto Sipper, hold the handle and the upper
portion of the front panel.
Fig. 1-14 Holding Portions for Lifting Auto Sipper
NOTICE: 1. In handling the Auto Sipper, always hold the handle
and the upper portion of the front panel. Holding
other portion may cause damage or deviation in the
adjustment.
2. Avoid touching the flow cell while handling the Auto
Sipper. Touching the flow cell may cause deviation in
the optical axis alignment or damage of the cell.
(2) Before mounting the Auto Sipper, make a connection
preparation on the main unit. Prepare the cable first. In the back
of the sample compartment of the main unit, a cable cover is
provided, under which the main unit connection cables are
accommodated. Press down the knob on the cable cover to
open the cover.
Sample compartment
Fig. 1-15 External View of Sample Compartment
1 - 9
Handle
Upper portion
of front panel
Flow cell
Wiring hole Cable cove knob
Back of the sample compartment
1.3.6