Hitachi UH5300 Instruction Manual page 12

SAFETY SUMMARY
Common Safety Precautions (Continued)
 The maintenance and checkup procedures to be performed by
 After installation, do not relocate the instrument. If the instrument
 If any warning/caution label has become illegible due to
 The parts having a useful lifetime indicated in this manual must be
 For reducing a risk of trouble occurrence due to physical
users are limited to those described in the manual only. When
performing maintenance and checkup procedures described in the
manual, obtain a clear understanding of them. Do not perform
maintenance and checkup procedures other than described in the
instruction manual. Otherwise failure of the instrument or personal
injuries may result.
is relocated, vibration or impact to be applied during relocation
could cause a malfunction in the optical components that have
been adjusted precisely.
deterioration with age or it has been damaged due to any cause,
notify your nearest Hitachi High-Technologies Corporation sales
representative or service office of Hitachi High-Technologies
Corporation sales representative for replacement with a new one.
replaced periodically as specified. If the instrument is operated
though the replacement of life-limited parts has already been
required, the instrument might become faulty due to part
deterioration, etc., causing leak, fuming, combustion or the like
trouble on safety.
For other than the replacement procedures instructed in this
manual, contact your nearest Hitachi High-Technologies
Corporation sales representative or service office of Hitachi
High-Technologies Corporation sales representative.
deterioration, it is requested to carry out the safety check
(available on a chargeable basis) or replacement with a new one
when the instrument has reached the end of its useful service life.
SAFETY - 4