Sce 2000 Component List - Cisco SCE 2000 4xGBE Installation And Configuration Manual

Checking the Shipping Container Contents

SCE 2000 Component List

Table 2-4
Component
SCE 2000 platform
Accessories
• Rack mount kit
• Management
cables
• Power cables
• Grounding kit
• Documentation
Optional Equipment Four rubber feet for tabletop installation
External Optical
Bypass module kit
*Titles and quantities of documents will vary. You must order the type and quantity of documentation
sets when you order the hardware.
We no longer ship the entire SCE 2000 documentation set automatically with each system. You must
Note
specifically order the documentation as part of the sales order. If you ordered documentation and did
not receive it, we will ship the documents to you within 24 hours. To order documents, contact a
customer service representative.
Cisco SCE 2000 4xGBE Installation and Configuration Guide
2-6
SCE 2000 Component List
Description
SCE 2020 4xGBE platform configured with either AC or
DC power supplies.
The following accessories might arrive in separate shipping
containers:
• Two mounting brackets for 19" rack
• Six screws (Philips), 8-32 x 3/8" (for attaching the
brackets to the SCE 2000 chassis)
• supporting mounting brackets for 19" rack
• Two crossrail supports for 19" rack with front and back
posts
• Fast Ethernet cable for connecting to the Management
ports
• RS-232 serial cable (DB-9 to RJ-45) for connecting to a
local terminal
Two AC power supply cords,if ordered with AC-input
power supply units
• Grounding cable
• Two Hex nuts (#¼")
• Two spring washers (#¼")
If ordered, SCE 2000 hardware and software
documentation set and the Cisco Documentation CD-ROM
package*
• 1 External Optical Bypass module
• 1 19" rack mounting panel
• 1 control cable
Chapter 2 Introduction to the SCE Platform
Received
OL-7824-04