Checking The Shipping Container Contents; Sce 1000 Component List - Cisco SCE 1000 Installation And Configuration Manual

Chapter 2 Introduction to the SCE Platform

Checking the Shipping Container Contents

Use the SCE 1000 Component List to check the contents of the SCE 1000 platform shipping
container.
Do not discard the shipping container. You need the container if you move or ship the SCE 1000
platform in the future.

SCE 1000 Component List

Table 2-4
Component
SCE 1000 platform
Accessories
• Rack mount kit
• Management
cables
• Power cables
• Grounding kit
• Documentation
Optional Equipment Four rubber feet for tabletop installation
External Optical
Bypass module kit
*Titles and quantities of documents will vary. You must order the type and quantity of documentation
sets when you order the hardware.
OL-7821-04
SCE 1000 Component List
Description
SCE 1010 2xGBE platform configured with either AC or
DC power supplies.
The following accessories might arrive in separate shipping
containers:
• Two mounting brackets for 19" rack
• Six screws (Philips), 8-32 x 3/8" (for attaching the
brackets to the SCE 1000 chassis)
• supporting mounting brackets for 19" rack
• Two crossrail supports for 19" rack with front and back
posts
• Fast Ethernet cable for connecting to the Management
ports
• RS-232 serial cable (DB-9 to RJ-45) for connecting to a
local terminal
Two AC power supply cords,if ordered with AC-input
power supply units
• Grounding cable
• Two Hex nuts (#¼")
• Two spring washers (#¼")
If ordered, SCE 1000 hardware and software
documentation set and the Cisco Documentation CD-ROM
package*
• 1 External Optical Bypass module
• 1 19" rack mounting panel
• 1 control cable
Cisco SCE 1000 2xGBE Installation and Configuration Guide
Checking the Shipping Container Contents
Received
2-5