Cisco SCE 2000 4xGBE Installation And Configuration Manual page 51

Chapter 4 Installation and Maintenance
Installing the SCE 2000 Platform
Step 3 Attach the grounding cable (green and yellow colored cable), firmly fastening the (enclosed) hex
nuts and spring washers with a #¼" hex wrench (refer to the appropriate figure for an AC- or DC-
powered SCE 2000 below).
The other side of the grounding cable must be connected to the site equivalent of the AC earth.
Figure 4-10: Grounding the Unit (AC)
Figure 4-11: Grounding the Unit (DC)
This completes the procedure for installing the SCE 2000 chassis. Proceed to the next section,
Connecting to the Power Supply, to continue the installation.
Cisco SCE 2000 4xGBE Installation and Configuration Guide
OL-7824-04 4-11