Move the arrow (t) to the item you want to change,
change the arrow to ?, then turn the controls in the
multi-function setting section.
LEVEL: Sets the reference value for automatic iris
adjustment to match the shooting condition.
APL/PK: Set the value added to the average amount
of incident light (APL) or to the peek amount of
incident light (PEAK) for automatic iris
adjustment.
Added value
-99
Peak:APL
1:0
Gain: Sets the gain value for automatic iris
adjustment. (If this value is set too high, a
hunching may occur depending on the type of the
lens.
Specifying the format of the video signal
<Format>
Select Format in the maintenance menu to specify the
format of the video signal.
<Format>
Aspect : 16:9
cPsF
: ON
Move the arrow (t) to the item you want to specify,
change the arrow to ?, and turn the left-hand control in
the multi-function setting section.
Aspect: Sets the aspect ratio (4:3 or 16:9) on the
picutre monitor.
PsF: Turns on or off the progressive scan.
Move the arrow (t) to Display Set up and set the
ENTER/CANCEL switch to ENTER to select the
items you want displayed on the picture monitor when
the DISPLAY switch is set to ON.
0
+99
1:1
0:1
Move the arrow (t) to the item you want to display
in the picture monitor, change the arrow to ?, then turn
the left-hand control in the multi-function setting
section.
Iris: Iris setting indication
MB: Master black display
RE: Rotary encoder indication
Filter: Filter indication
Gain: Gain indication
Shutter: Shutter speed/mode indication
Aspect: Aspect ratio indication of the picture
Message: Message
Display Set up menu
<Display Set up>
c
Iris
: ON
MB
: ON
RE
: ON
Filter : ON
Gain
: ON
Shutter: ON
Aspect : ON
Message: ON
monitor
21(E)