Sony BKP-5973 Operation Manual page 34

Menu Settings
Adjusting the white balance <White>
Select White in the Paint menu, then set the white
balance by individually adjusting the white level of the
R, G, and B signals.
<White>
ATW :
c
White :
Use the controls in the multi-function setting section to
adjust the white balance.
To turn on or off the auto tracking white balance
adjustment function
Move the arrow (t) to ATW, change the arrow to ?,
and turn the left-hand control in the multi-function
setting section to turn it on or off.
Adjusting the black balance <Black>
Select Black in the Paint menu, then set the black
balance by individually adjusting the black level of the
R, G, and B signals.
<Black>
[R]
c-99
Use the controls in the multi-function setting section to
adjust the black balance.
12(E)
OFF
[R] [G] [B]
-99 0 99
[G] [B]
0 99
Adjusting the flare <Flare>
Select Flare in the Paint menu. You can then turn on or
off the flare function or individually adjust the flare
level of the R, G, and B signals.
<Flare>
ON
[R]
c-99
To turn on or off the flare function
Move the arrow (t) to ON (or OFF) on the upper
column, change the arrow to ?, and turn the left-hand
control in the multi-function setting section to turn it
on or off.
To adjust the flare
Move the arrow (t) to the numeric value on the
lower column, change the arrow to ?, and turn the three
controls in the multi-function setting section to adjust
the R, G, and B signals individually.
Adjusting the gamma level <Gamma>
Select Gamma in the Paint menu. You can then adjust
the master gamma and the gamma level for the R, G,
and B signals individually.
<Gamma>
[Mode]
STD
[STEP]
ON 0.45
[R]
c-99
To change the gamma curb table
Move the arrow (t) to the upper column, change the
arrow to ?, and turn the right-hand control in the multi-
function setting section to select the gamma curb table.
[G] [B]
0 99
[Table]
1
[M]
99
[G] [B]
0 99