Sony BKP-5973 Operation Manual page 37

To adjust the master white clip
Move the arrow (t) to the upper column, change the
arrow to ?, and turn the right-hand control in the multi-
function setting section. The master white clip for the
R, G, and B signals are adjusted simultaneously.
To adjust the white clip for the R, G, and B signals
individually
Move the arrow (t) to the numeric value on the
lower column, change the arrow to ?, and turn the
three controls in the multi-function setting section to
adjust the R, G, and B signals individually.
Adjusting the matrix compensation
<Matrix>
When you select Matrix in the Paint menu, you can
perform basic color correction of the R, G, and B
signals using the linear matrix circuit to obtain
optimum spectral characteristics.
<Matrix>
Matrix : ON
User : ON
Preset : OFF
Multi : OFF
[-R]
c
R :
G : -99
B : -99
To turn on or off the matrix compensation
Move the arrow (t) to Matrix, change the arrow to ?,
and turn the left-hand control in the multi-function
setting section to turn the matrix compensation on or
off.
To turn on or off the custom matrix
Move the arrow (t) to User, change the arrow to ?,
and turn the left-hand control in the multi-function
setting section to turn the custom matrix on or off.
To turn on or off the preset matrix
Move the arrow (t) to Preset, change the arrow to ?,
and turn the left-hand control in the multi-function
setting section to turn the preset matrix on or off.
[-G] [-B]
* 0 99
* 99
0 *
To turn on or off the multi-matrix
Move the arrow (t) to Multi, change the arrow to ?,
and turn the left-hand control in the multi-function
setting section to turn it on or off.
To adjust the matrix compensation
Move the arrow (t) to R, G, or B, change the arrow
to ?, and turn the three controls in the multi-function
setting section to adjust the R, G, and B signals
individually.
Adjusting the multi-matrix compensation
<Multi Matrix>
Select MultiMatrix in the paint menu to adjust hue and
saturation for each of 16 phases individually.
<Multi Matrix>
Matrix : OFF
User : OFF
Preset : ON
Multi : OFF
Phase :
c
To select the phase whose hue or saturation is
adjusted
Move the arrow (t) to Phase, change the arrow to ?,
and turn the left-hand control in the multi-function
setting section.
To adjust the hue or saturation of the selected
phase
Move the arrow (t) to numeric value on the lowest
column, change the arrow to ?, and turn the left-hand
control (for setting the hue) or turn the right-hand
control (for setting the saturation) in the multi-function
setting section.
0.0
[Hue] [Sat]
0 0
15(E)